Brand New in Retail Box
XtraStor
Aluminum Casing! Better Material
2.5" USB 2.0 Portable External HDD Enclosure Case
w/USB Cable & Leatherette Case
For MAC and PC
Color: Black
|
Part#: GP-EN25U2-S3-BK
4.9 x 2.95" x 0.5" Only 0.5" high, superslim!
The USB 2.0 IDE bridge is fully compatible with the USB
1.1 and USB 2.0 function. It supports two interface descriptors, both FS (full
speed) and HS (high speed). It provides a high speed (480Mbps) serial data
connection between IDE device and USB 2.0 host PCI.
USB 2.0 Hard Drive Enclosure Kit
for 2.5" notebook hard drives. Super slim portable enclosure. Have the
enclosure kit & put in your own hard disk drive. Enclosure Kit works for
laptops/notebooks & desktop computers. Easily converts any 2.5" laptop hard
drive 9.5mm or thinner to an external portable drive.
This USB-Drive Enclosure Kit is
an external hard drive kit that offers a low-priced, "instant" storage
solution for archive backups, large-capacity
portable storage, classified/sensitive data storage, or just extra disk storage.
The USB-Drive supports Plug & Play "Hot Swapping" through the Universal Serial
Bus (USB) port for instant access to your files and data and high speed
data transfer, up to 480mb/sec.
Features and support:
-
Support USB 1.1 on Window 98/98SE/ME/2000/XP and Mac O/S 8.6, 9.x, 10.x
-
Support USB 2.0 on Window 98SE/ME/2000/XP and Mac O/S 10.x.
-
Support HDD, MO, CD-ROM, CD-RW, DVD, and DVD-ROM
-
USB 2.2/IDE compliant:
-
Integrated USB transceiver
-
High speed (480mbit) and full speed (12mbit) support
-
USB suspend/resume, remote wake up support
-
Support ATA PIO modes 0-4: ATA interface operation mode is
automatically selected during device initialization or manually programmed with
configuration date
-
support UDMA modes 0-4 operation
-
Bootable: The computer can be booted directly from this
enclosure, for the purpose of switching OS and system backup. BIOS support
bootable function required.
-
40x time faster than USB 1.1
-
Support 44-pin IDE interface
-
Easy to replace and assemble ATA device
-
USB 2.0 and 1.1 compliant
-
Up to 480mb/sec.
-
Plug and Play hot swapping
-
Superslim, lightweight and portable
-
Draws power from your USB port, no need for ac adapter
-
Compatible with most Mac & PC computers
-
Weight of the USB drive is around 3 oz. (without hard drive
installed)
-
Dimension: 5.0" x 2.95" x 0.5"
System requirements:
-
One available USB port (either USB 1.1 or USB 2.0)
-
Mac O/S 8.6, 9.x, 10.x (please see support above)
-
Windows 98,98SE, Windows Me, 2000 and XP.
-
One available CD-ROM drive for software installation
-
16MB RAM
Package contents
-
Aluminum USB 2.0 2.5" HDD Enclosure (Black)
-
USB Cable (A-mini B) (as shown below)
-
Leatherette Case
-
Software/Instruction CD
-
2.5" hard drive NOT included
| |
|
Support
Zone |
| For XP, please
go to control panel-->Administrative tools-->Computer Management. Under
"Computer Management," click "Disk Management," then check the
right-bottom window (scrolling down if necessary), you should see the
additional hard drive disk, right click mouse on it, choose "new
partition", then follow the instructions for the format of the hard
drive. After finishing the format, you should be able to see the
additional drive under my computer icon on the desktop. If you are
still can't get it to work, it doesn't mean the external HDD doesn't
work or is defective. Please contact us by email or phone, we are here
to help you to solve the problem.
Still not working? Try on another computer, and
see if other computer detects the new hardware. Also, please download
the USB 2.0 service pack from
www.microsoft.com.
Tips:
- Try to adjust the jumper on the HDD and try
again.
- Reboot the computer
- Please do try on another computer, many
problems are caused by the busted USB port on the computer
- Redo the format and repeat the trouble
shooting above
|
Warranty: 180 day warranty.
|
