|
Brand New in Retail Box
XtraStor
USB 2.0
+ Firewire IEEE 1394
Aluminum 3.5"
Portable External IDE HDD Enclosure Case
For MAC and PC
Part#: GP-EN35-U2FW
|
Bring data
transportability and USB+1394 connectivity to your computer
Fit IDE 3.5"
UP to 480Mbps. 40 times faster than USB
1.1.
Dimension: 7.9" x 4.40" x 1.25"
The USB 2.0+1394 IDE bridge is fully compatible with the USB 1.1, USB 2.0 and
IEEE1394 function. It supports two interface descriptors, both FS (full speed)
and HS (high speed). It provides a high speed (480Mbps) serial data connection
between IDE device and USB 2.0 host PCI, and 400Mbps between IDE and Firewire
IEEE1394.
USB 2.0+IEEE1394 Hard Drive
Enclosure Kit for 3.5" hard drives. Super slim portable enclosure. Have
the enclosure kit & put in your own hard disk drive. Enclosure Kit works
for laptops/notebooks & desktop computers.
This USB+1394-Drive Enclosure Kit
is an external hard drive kit that offers a low-priced, "instant" storage
solution for archive backups, large-capacity
portable storage, classified/sensitive data storage, or just extra disk storage.
The USB+1394-Drive supports Plug & Play "Hot Swapping" through the Universal
Serial Bus (USB) port and 1394 for instant access to your files and data
and high speed data transfer, up to 480Mbps.
Features and support:
-
Support USB 1.1 on Window 98/98SE/ME/2000/XP and Mac O/S 8.6 or above
-
Support USB 2.0 on Window 98SE/ME/2000/XP and Mac O/S 8.6 or above
-
Support MAC OS 8.6/9.X/10.X
-
USB 2.2/IDE compliant:
-
Integrated USB transceiver
-
High speed (480mbit) and full speed (12mbit) support
-
USB suspend/resume, remote wake up support
-
Support ATA PIO modes 0-4: ATA interface operation mode is
automatically selected during device initialization or manually programmed with
configuration date
-
support UDMA modes 0-4 operation
-
Bootable: The computer can be booted directly from this
enclosure, for the purpose of switching OS and system backup. BIOS support
bootable function required.
-
40x time faster than USB 1.1
-
Support 40-pin IDE interface
-
Easy to replace and assemble ATA device
-
USB 2.0, 1.1 and Firewire IEEE1394 compliant
-
Up to 480mb/sec.
-
Plug and Play hot swapping
-
Superslim and portable
-
Compatible with most Mac & PC computersWeight: 11 oz.
(without hard drive installed)
-
Dimension: 7.9" x 4.40" x 1.25"
Package contents
-
Aluminum USB 2.0+Firewire 1394 3.5" HDD
Enclosure (Silver)
-
USB Cable
-
Software CD
-
Power cords (100~240 V)
-
User Manual
-
Screws
-
3.5" hard drive NOT included. Sold Separately.
| |
|
Support
Zone |
| For XP, please
go to control panel-->Administrative tools-->Computer Management. Under
"Computer Management," click "Disk Management," then check the
right-bottom window (scrolling down if necessary), you should see the
additional hard drive disk, right click mouse on it, choose "new
partition", then follow the instructions for the format of the hard
drive. After finishing the format, you should be able to see the
additional drive under my computer icon on the desktop. If you are
still can't get it to work, it doesn't mean the external HDD doesn't
work or is defective. Please contact us by email or phone, we are here
to help you to solve the problem.
Still not working? Try on another computer, and
see if other computer detects the new hardware. Also, please download
the USB 2.0 service pack from
www.microsoft.com.
Tips:
- Try to adjust the jumper on the HDD and try
again.
- Reboot the computer
- Please do try on another computer, many
problems are caused by the busted USB port on the computer
- Redo the format and repeat the trouble
shooting above
|
System requirements:
-
One available USB port (either USB 1.1 or USB 2.0) or 1394
port
-
Mac O/S 8.6 or above.
-
Windows 98/98SE, Windows Me, 2000 and XP. (ME/2000/XP don't
need to install any driver)
-
One available CD-Rom Drive for software installation
-
16MB RAM
Warranty: 1 year warranty.
 |
