New Items

Audio Video Accessories
Apple Accessories
Bluetooth Device
Cables
Input Devices
Mice Keyboard
Miscellaneous
Networking
Phone Accessories
Smart Home
 
 
Auto Lighting

Solution Graphics

Copyright©, 2004-18 Premiertek All Rights Reserved.
New
4G LTE PCS Cellular Signal Amplifier Kit for Home and office
w/Yagi and Ceiling Antenna, 5M &15M RG-6 Coaxial Cables.

Part#: PL-SA-LTEPCS

Note: Works for AT&T and T-Mobile. Do not work for Verizon and Sprint (in USA)

See Manual here

 

 

Overview:

Now featuring adjustable gain to simplify installation! The cellular signal booster is dual-band (700 &1900 MHz) wireless amplifier for use in homes, offices and other buildings. It significantly improves voice and data performance for multiple cell phones and data cards simultaneously, and works with all major North American cell phone carriers, AT&T and T-Mobile. This 65 dB in-building booster combines high performance with ease of installation, and it can be used with an outside directional high gain antenna or omni-directional antenna with that eliminates researching cell tower locations and antenna orientation.

Features and Specs:

  • Greatly reduces dropped calls, extends signal range, and increases data rates

  • Reduce radiation to human body and brain from cell phone

  • Extend cell phone battery lifespan

  • No physical connection to your cell phone or data card

  • Allows multiple phones and cellular data cards to be used simultaneously

  • Oscillation (or interference) detection and automatic shutdown with auto reset

  • Overload protection circuit – protects cell towers from being overloaded

  • Amplifies signals both to and from the cell tower

  • Automatic Level Control technology used to provide auto amplitude fixing

  • Maximum 2500 milliwatts output power - More than 20 times the power of your cell phone alone

  • Extends phone battery life – Booster enables phone to work at reduced power

  • Low Loss 50ohm RG-6 coaxial cable

  • Nickel-plated body and gold-plated center pins

  • Conductor Material: Copper Clad Steel

  • Shield Material: Bare Copper Braid

  • Insulation Material: Solid Polyethylene

Amplifier Specifications:

Part#

PL-SA-LTEPCS-3

Frequency Uplink Downlink
746-756/1850-1910MHz 777-787/1930-1990MHz
Gain Uplink: 60 dB / Downlink: 65 dB
Output Power 20dBm
ALC 28dB
I/O Impedance 50 ohms
I/O Return Loss less than -8dB
Max Uplink Power 1140 mw / 1114 mw
Max Downlink Power 26 dBm / 25 dBm
Noise Figure 3.5 dB nominal
Band Flatness ±5dB
Power Requirements 110-220 V AC, DC 5V
Amplifier Connectors N-Female
Dimensions 8.3 x 5.1 x 1 (inches)
Weight 1.5 lbs

Yagi Antenna Specifications:

Frequency Range 700-2500MHz
Gain 8.5dBi
VSWR 1.5:1 Max
Impedance 50 Ohm
Polarization Vertical or Horizontal
Beamwidth/Horizontal 70º
Beamwidth/Vertical 55º
Power handling 50W
Front Rear Ratio >20dB
RF Connector N Female
Cable length 24cm
Temperature -40ºC~+60ºC
Weight 1.05 lbs
Dimensions

295x210×65mm (11.6"x8.3"x2.6")

Ceiling Antenna Specifications:

Frequency Range 700-2500MHz
Gain 3dBi
VSWR 1.5:1 Max
Impedance 50 Ohm
Polarization Vertical or Horizontal
Beamwidth/Horizontal 180º
Beamwidth/Vertical 180º
Power handling 50W
Front Rear Ratio >20dB
RF Connector N Female
Cable length 33cm
Temperature -40ºC~+60ºC
Weight 0.45 lbs
Dimensions

Φ165×105mm (Φ6.7"x4.1")

Kit Contents:

  • Yagi Antenna (Outdoor)

  • Ceiling Antena (Indoor)

  • Dual Band Amplifier

  • 15 Meter N-M to N-M RG-6 Cable (Indoor)

  • 5 Meter N-M to N-M RG-6 Cable (from Outdoor to Indoor)

Shipping info: 8.8lbs. 17.7"x10.5"x9.7"

Warranty: 1 year